BS 3766-1978

机床用冷却液泵规范

Specification for coolant pumps for machine tools

BS 4082-1-1969

立式管线离心泵外部尺寸规范.第1部分:"I"型

Specification for external dimensions for vertical in-line centrifugal pumps - 'I' Type

BS 4082-2-1969

立式管线离心泵外部尺寸规范.第2部分:"U"型

Specification for external dimensions for vertical in-line centrifugal pumps - 'U' Type

BS 4617-1983

液压流体动力传输用动力泵和电动机性能的测定方法

Methods for determining the performance of pumps and motors for hydraulic fluid power transmission

BS 5173-102.3-1988

橡胶和塑料软管及软管组件试验方法.第102部分:液压试验.第3节:燃料分配泵软管体积膨胀测定

Methods of test for rubber and plastics hoses and hose assemblies - Hydraulic pressure tests - Determination of volumetric expansion of fuel-dispensing pump hoses

BS 5257-1975

卧式端吸离心泵(16bar)规范

Specification for horizontal end-suction centrifugal pumps (16 bar)

BS 5860-1980

水轮机、蓄水泵及涡轮泵的效率测定方法(热力学法)

Method for measuring the efficiency of hydraulic turbines, storage pumps and pump-turbines (thermodynamic method)

BS 5944-1-1992

液压动力系统和部件气动噪声测量.第1部分:液压泵试验方法

Measurement of airborne noise from hydraulic fluid power systems and components - Method of test for pumps

BS 5944-5-1985

液压系统和部件气动噪音测量.第5部分:使消声室测定液压泵声功率等级的简易方法

Measurement of airborne noise from hydraulic fluid power systems and components - Simplified method of determining sound power levels from pumps using an anechoic chamber

BS 5944-6-1992

液压动力系统和部件气动噪声测量.第6部分:平行六面体传声器阵列测试液压泵噪声

Measurement of airborne noise from hydraulic fluid power systems and components - Method of test for pumps using a parallelepiped microphone array

BS 6169-1-1981

液态烃类体积测量方法.第1部分:置换流量计系统(不包括配剂泵)

Methods for volumetric measurement of liquid hydrocarbons - Displacement meter systems (other than dispensing pumps)

BS 6907-4-1988

露天矿和采石场的电气装置.第4部分:开采、层叠和处理机械设备、泵和低信号级及通信系统推荐标准

Electrical installations for open-cast mines and quarries - Recommendations for winning, stacking and processing machinery, pumps and low signal level and communications systems

BS 7117-2-1991

安装在加油站并用以加液体燃料的计量泵和分配器.安装指南

Metering pumps and dispensers to be installed at filling stations and used to dispense liquid fuel - Guide to installation

BS 7117-3-1991

安装在加油站并用以加液体燃料的计量泵和分配器.安装后维护指南

Metering pumps and dispensers to be installed at filling stations and used to dispense liquid fuel - Guide to maintenance after installation

BS 7250-1989

液压传动正排量泵和电动机导出量的测定方法

Methods of determining the derived capacity of hydraulic fluid power positive displacement pumps and motors

BS 7929-1999

泵铸造设计程序鉴定指南

Guide for the verification of a pump casing design procedure

BS 799-7-1988

燃油设备.第7部分:有旋转轴和外部传动装置的雾化燃油器泵的尺寸规范

Oil burning equipment - Specification for dimensions of atomizing oil burner pumps with rotating shaft and external drive

BS 8204-7-2003

找平层、底基和现场铺筑地板材料.可泵送自找平找平层.实施规范

Screeds, bases and in-situ floorings - Pumpable self-smoothing screeds - Code of practice

BS DD CEN/TS 14825-2004

对流式供暖和制冷用带有电动压缩机的空气调节器、液体制冷包和热泵.部分负载条件下的检验和额定

Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Testing and rating at part load conditions

BS DD ENV 12102-1997

带电驱动压缩机的空调、加热泵和除湿器.空气噪声的测量.声功率水平的测定

Air conditioners, heat pumps and dehumidifiers with electrically driven compressors - Measurement of airborne noise - Determination of the sound power level

BS DD IEC TS 62091-2003

低压开关设备和控制设备.固定式消防泵驱动器用控制器

Low-voltage switchgear and controlgear - Controllers for drivers of stationary fire pumps

BS EN 1012-1-1997

压缩机和真空泵.安全性要求.压缩机

Compressors and vacuum pumps - Safety requirements - Compressors

BS EN 1012-2-1997

压缩机和真空泵.安全性要求.真空泵

Compressors and vacuum pumps - Safety requirements - Vacuum pumps

BS EN 1028-1-2002

消防泵.起动注油器的消防离心泵.分类.总则和安全性要求

Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Classification - General and safety requirements

BS EN 1028-2-2002

消防泵.带起动油泵的消防离心泵.一般要求和安全性要求的验证

Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Verification of general and safety requirements

BS EN 1076-1997

工作地点的环境.测定气体和蒸气用的泵吸附管.要求和试验方法

Workplace atmospheres - Pumped sorbent tubes for the determination of gases and vapours - Requirements and test methods

BS EN 12157-1999

离心泵.机床用冷却液泵装置.公称流动速率、尺寸

Rotodynamic pumps - Coolant pump units for machine tools - Nominal flow rate, dimensions

BS EN 12162-2001

液体泵.安全要求.液压静态试验程序

Liquid pumps - Safety requirements - Procedure for hydrostatic testing

BS EN 12178-2003

制冷系统和热泵.液位指示设备.要求、试验和标记

Refrigerating systems and heat pumps - Liquid level indicating devices - Requirements, testing and marking

BS EN 12262-1999

旋转动力泵.技术文献.术语,交付范围,布局

Rotodynamic pumps - Technical documents - Terms, delivery range, layout

BS EN 12263-1999

制冷系统和热力泵.限压安全开关装置.要求和试验

Refrigerating systems and heat pumps - Safety switching devices for limiting the pressure - Requirements and tests

BS EN 12284-2003

冷却系统和加热泵.阀.要求、试验及标记

Refrigerating systems and heat pumps - Valves - Requirements, testing and marking

BS EN 12309-1-2000

净热输入不超过70KW的燃气吸收和吸收空气调节式和/或热力泵装置

Gas-fired absorption and adsorption air-conditioning and/or heat pump appliances with a net heat input not exceeding 70 kW - Safety

BS EN 12309-2-2000

净热输入不超过70KW的燃气吸收和吸收空气调节式和/或热力泵装置.能量的合理使用

Gas-fired absorption and adsorption air-conditioning and/or heat pump appliances with a net heat input not exceeding 70 kW - Rational use of energy

BS EN 1232-1997

工作场所环境.化学试剂的小型专用抽样泵.要求和试验方法

Workplace atmospheres - Pumps for personal sampling of chemical agents - Requirements and test methods

BS EN 12462-1998

生物技术.泵性能准则

Biotechnology - Performance criteria for pumps

BS EN 12483-1999

液泵.带变频机的泵装置.担保和兼容性试验

Liquid pumps - Pump units with frequency inverters - Guarantee and compatibility tests

BS EN 12514-1-2000

油燃烧器供油系统的安装.安全性要求和试验.零部件、供油泵、控制和安全装置、供油罐

Installations for oil supply systems for oil burners - Safety requirements and tests - Parts, oil feed pumps, control and safety devices, supply tanks

BS EN 12583-2000

供气系统.压缩机泵站.功能要求

Gas supply systems - Compressor stations - Functional requirements

BS EN 12639-2000

液压泵和泵组.噪音测试规程.2级和3级精度

Liquid pumps and pump units - Noise test code - Grade 2 and grade 3 of accuracy

BS EN 12723-2000

液压泵.泵和设备的通用术语.定义、数量、字母符号和单位

Liquid pumps - General terms for pumps and installations - Definitions, quantities, letter symbols and units

BS EN 12919-1999

工作场所空气.体积流速大于51/min的化学试剂取样用泵.要求和试验方法

Workplace atmospheres - Pumps for the sampling of chemical agents with a volume flow rate of over 51/min - Requirements and test methods

BS EN 13136-2001

灭火系统和热力泵.释压装置和配套管道.计算方法

Refrigerating systems and heat pumps - Pressure relief devices and their associated piping - Methods for calculation

BS EN 13275-2000

低温容器.低温设备用泵

Cryogenic vessels - Pumps for cryogenic service

BS EN 13313-2002

制冷系统和加热泵.人员的能力.

Refrigerating systems and heat pumps - Competence of personnel

BS EN 13617-1-2004

加油站.计量泵、分配器和遥控泵送装置的性能和建造的安全要求

Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units

BS EN 13617-2-2004

加油站.计量泵和配油器上安全制动器的建造和性能的安全要求

Petrol filling stations - Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers

BS EN 13617-4-2004

加油站.计量泵和配油器用转环的建造和性能的安全与环境要求

Petrol filling stations - Safety and environmental requirements for construction and performance of swivels for use on metering pumps and dispensers

BS EN 13951-2003

液泵.安全要求.农产食品设备.使用中卫生保证的设计原则

Liquid pumps - Safety requirements - Agrifoodstuffs equipment - Design rules to ensure hygiene in use

BS EN 14275-2003

车用燃料.汽油及柴油质量的评估.零售点油泵及商业点燃料自动售货机的抽样

Automotive fuels - Assessment of petrol and diesel fuel quality - Sampling from retail site pumps and commercial site fuel dispensers

BS EN 14343-2005

旋转容积泵.验收性能试验

Rotary positive displacement pumps — Performance tests for acceptance

BS EN 14466-2005

消防泵.便携式消防泵.安全和性能要求、试验

Fire fighting pumps - Portable pumps - Safety and performance requirements, tests

BS EN 14511-1-2004

房间取暖和制冷用带电动压缩机的空气调节装置、液冷组件和热泵.术语和定义

Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling

BS EN 14511-2-2004

房间取暖和制冷用带电动压缩机的空气调节装置、液冷组件和热泵.试验条件

Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Test conditions

BS EN 14511-3-2004

房间取暖和制冷用带电动压缩机的空气调节装置、液冷组件和热泵.试验方法

Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Test methods

BS EN 14511-4-2004

房间取暖和制冷用带电动压缩机的空气调节装置、液冷组件和热泵.要求

Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Requirements

BS EN 14662-1-2005

环境空气质量.测量苯浓度的标准方法.热解吸和气相色谱法后的泵取样

Ambient air quality - Standard method for measurement of benzene concentrations - Pumped sampling followed by thermal desorption and gas chromatography

BS EN 14662-2-2005

环境空气质量.苯浓度测量的标准方法.溶剂解吸和气相色谱法后的泵送取样

Ambient air quality - Standard method for measurement of benzene concentrations - Pumped sampling followed by solvent desorption and gas chromatography

BS EN 14662-3-2005

环境空气质量.测量苯浓度的标准方法.自动泵取样和现场气相色谱法

Ambient air quality - Standard method for measurement of benzene concentrations - Automated pumped sampling with in situ gas chromatography

BS EN 14710-1-2005

消防泵.无起动注油器的消防离心泵.分类、一般要求和安全要求

Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Classification, general and safety requirements

BS EN 14710-2-2005

消防泵.无起动注油器的消防离心泵.一般要求和安全要求的验证

Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Verification of general and safety requirements

BS EN 1736-2000

制冷系统和热力泵.柔性管元件.振动隔绝器和膨胀节.要求,设计和安装

Refrigerating systems and heat pumps - Flexible pipe elements, vibration isolators and expansion joints - Requirements, design and installation

BS EN 1861-1998

制冷系统和热力泵.系统流量图,管道和设备图.布局和符号

Refrigerating systems and heat pumps - System flow diagrams and piping and instrument diagrams - Layout and symbols

BS EN 1947-2002

消防软水管.消防泵和车用半刚性输送软水管和水管组件

Fire-fighting hoses - Semi-rigid delivery hoses and hose assemblies for pumps and vehicles

BS EN 22858-1993

端吸式离心泵(额定压力16巴).命名、标称效率点和尺寸

End-suction centrifugal pumps (rating 16 bar) - Designation, nominal duty point and dimensions

BS EN 23661-1993

端吸式离心泵的底板和安装尺寸

End-suction centrifugal pumps - Baseplate and installation dimensions

BS EN 255-3-1997

带电动压缩机的空调器.液体制冷设备和热力泵.加热方式.卫生间热水装置的试验和标记要求

Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors - Heating mode - Testing and requirements for marking for sanitary hot water units

BS EN 378-1-2000

制冷系统和加热泵规范.安全性和环境要求.基本要求、定义、分类和选择规范

Specification for refrigerating systems and heat pumps - Safety and environmental requirements - Basic requirements, definitions, classification and selection criteria

BS EN 378-2-2000

制冷系统和加热泵规范.安全性和环境要求.设计、制造、试验、标记和文献

Specification for refrigerating systems and heat pumps - Safety and environmental requirements - Design, construction, testing, marking and documentation

BS EN 378-3-2000

制冷系统和加热泵规范.安全性和环境要求.安装现场和人员保护

Specification for refrigerating systems and heat pumps - Safety and environmental requirements - Installation site and personal protection

BS EN 378-4-2000

制冷系统和加热泵规范.安全性和环境要求.操作、维修、检修和回收

Refrigerating systems and heat pumps - Safety and environmental requirements - Operation, maintenance, repair and recovery

BS EN 45510-5-4-1998

发电站设备采购指南.水轮机、蓄水泵和水泵水轮机

Guide for the procurement of power station equipment - Hydraulic turbines, storage pumps and pump-turbines

BS EN 45510-6-4-2000

发电站设备采购指南.涡轮机辅助设备.泵

Guide for the procurement of power station equipment - Turbine auxiliaries - Pumps - Pumps

BS EN 50216-7-2002

电力变压器和反应堆配件.运输油用电泵

Power transformers and reactor fittings - Electric pumps for transformer oil

BS EN 60041-1995

水轮机,现场验收试验测定蓄水泵和涡轮泵液压性能

Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump-turbines

BS EN 60193-1999

水轮机、蓄水泵和泵轮机.模型验收试验

Hydraulic turbines, storage pumps and pump-turbines — Model acceptance tests

BS EN 60335-2-40-2003

家用和类似用途电器的安全规范.特殊要求.电热泵、空气调节器和去湿器

Household and similar electrical appliances - Safety - Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers

BS EN 60335-2-41-2003

家用和类似用途电器.泵的特殊要求

Household and similar electrical appliances - Particular requirements for pumps

BS EN 60335-2-51-2003

家用和类似用途电器的安全.加热和供水设施用固定式循环泵的特殊要求

Specification for safety of household and similar electrical appliances - Particular requirements for stationary circulation pumps for heating and service water installations

BS EN 60601-2-24-1998

医疗电气设备.特殊安全要求.输液泵和控制器的特殊安全要求.

Medical electrical equipment - Particular requirements for safety - Particular requirements for the safety of infusion pumps and controllers

BS EN 60609-1-2005

水轮机、蓄能泵和水泵水轮机.气蚀损坏的评定.反击式水轮机、蓄能泵和水泵水轮机的评定

Hydraulic turbines, storage pumps and pump-turbines - Caviatation pitting evaltuation - Evalution in reaction turbines, storage pumps and pumps-turbines

BS EN 60609-2-1998

水轮机、蓄能泵和水泵水轮机气蚀损坏的评定.水斗式水轮机的评定

Cavitation pitting evaluation in hydraulic turbines, storage pumps and pump turbines - Evaluation in Pelton turbines

BS EN 60994-1993

水力机械(水轮机、蓄水泵和水轮泵)振动和脉动现场测量指南

Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storage pumps and pump-turbines)

BS EN 61290-6-1-1998

光纤放大器.基本规范.泵漏参数测试方法.光信号分离器

Optical fibre amplifiers - Basic specification - Test methods for pump leakage parameters - Optical demultiplexer

BS EN 61702-2000

直接耦合光伏(PV)水泵系统的额定值

Rating of direct coupled photovoltaic (PV) pumping systems

BS EN 733-1995

带支承架的额定值为10bar的端吸式离心泵.公称负荷点、主要尺寸和命名系统

End-suction centrifugal pumps, rating with 10 bar with bearing bracket - Nominal duty point, main dimensions, designation system

BS EN 734-1995

侧槽泵PN40.公称负荷点、主要尺寸和命名系统

Side channel pumps PN 40 - Nominal duty point, main dimensions, designation system

BS EN 735-1995

旋转动态泵的总体尺寸.公差

Overall dimensions of rotodynamic pumps - Tolerances

BS EN 752-6-1998

室外建筑物的排水和污水系统.泵抽排装置

Drain and sewer systems outside buildings - Pumping installations

BS EN 809-1998

液体用泵和泵装置.一般安全性要求

Pumps and pump units for liquids - Common safety requirements

BS EN ISO 13709-2003

石油、石化和天然气工业用离心泵

Centrifugal pumps for petroleum, petrochemical and natural gas industries

BS EN ISO 13710-2004

石油、石化和天然气工业.往复式变容真空泵

Petroleum, petrochemical and natural gas industries - Reciprocating positive displacement pumps

BS EN ISO 14847-1999

回转容积泵.技术要求

Rotary positive displacement pumps - Technical requirements

BS EN ISO 15136-1-2001

石油和天然气工业的钻孔设备.人工提升用步进式空腔泵系统.泵

Downhole equipment for petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Pumps

BS EN ISO 15783-2003

无密封旋转动力泵.II级.规范

Seal-less rotodynamic pumps - Class II - Specification

BS EN ISO 16330-2003

往复式正排量泵和泵装置.技术要求

Reciprocating positive displacement pumps and pump units - Technical requirements

BS EN ISO 20763-2004

石油和相关产品.液压液耐磨性的测定.叶轮泵法

Petroleum and related products - Determination of anti-wear properties of hydraulic fluids - Vane pump method

BS EN ISO 21049-2005

泵.离心泵和旋转泵用轴封系统

Pumps - Shaft sealing systems for centrifugal and rotary pumps

BS EN ISO 2151-2004

声学.压缩机和真空泵的噪声试验规范.工程法(2级)

Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (Grade 2)

BS EN ISO 5198-1999

离心式混流轴向泵.液压性能试验规程.精密级

Centrifugal, mixed flow and axial pumps - Code for hydraulic performance tests - Precision class

BS EN ISO 5199-2002

离心泵的技术规范.2级

Technical specifications for centrifugal pumps - Class II

BS EN ISO 7886-2-1996

一次性使用无菌皮下注射器.动力驱动注射器泵的注射器

Sterile hypodermic syringes for single use - Syringes for use with power-driven syringe pumps

BS EN ISO 8849-2003

小艇.电动直流舱底泵

Small craft - Electrically operated direct-current bilge-pumps

BS EN ISO 9905-1994

离心泵技术规范.I类

Technical specifications for centrifugal pumps - Class I

BS EN ISO 9906-2000

涡轮式泵.液压性能验收试验.1和2级

Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1 and 2

BS EN ISO 9908-1994

离心泵技术规范.III类

Technical specifications for centrifugal pumps - Class III

BS IEC 60609-2-1998

水轮机、蓄能泵和水泵涡轮机空穴评估.水戽式水轮机的评估

Cavitation pitting evaluation in hydraulic turbines, storage pumps and pump turbines - Evaluation in Pelton turbines

BS IEC 61366-1-1998

水轮机、蓄能泵和水泵涡轮.投标文件.综述及附录

Hydraulic turbines, storage pumps, and pump turbines - Tendering documents - General and annexes

BS IEC 61366-2-1998

水轮机、蓄能泵和水泵涡轮.投标文件.弗兰西斯涡轮机技术规范指南

Hydraulic turbines, storage pumps, and pump turbines - Tendering documents - Guidelines for technical specifications for Francis turbines

BS IEC 61366-3-1998

水轮机、蓄能泵和水泵涡轮.投标文件.水戽式水轮机的技术规范指南

Hydraulic turbines, storage pumps, and pump turbines - Tendering documents - Guidelines for technical specifications for Pelton turbines

BS IEC 61366-4-1998

水轮机、蓄能泵和水泵涡轮.投标文件.卡普兰式水轮机和推进式水轮机的技术规范指南

Hydraulic turbines, storage pumps, and pump turbines - Tendering documents - Guidelines for technical specifications for Kaplan and propeller turbines

BS IEC 61366-5-1998

水轮机、蓄能泵和水泵涡轮.投标文件.管状水轮机技术规范指南

Hydraulic turbines, storage pumps, and pump turbines - Tendering documents - Guidelines for technical specifications for tubular turbines

BS IEC 61366-6-1998

水轮机、蓄能泵和水泵涡轮.投标文件.水泵涡轮技术规范指南

Hydraulic turbines, storage pumps, and pump turbines - Tendering documents - Guidelines for technical specifications for pump-turbines

BS IEC 61366-7-1998

水轮机、蓄能泵和水泵涡轮.投标文件.蓄水泵技术规范指南

Hydraulic turbines, storage pumps, and pump turbines - Tendering documents - Guidelines for technical specifications for storage pumps

BS ISO 10767-1-1996

液压流体动力.对系统和部件产生压力波动级的测定.第1部分:泵精度法

Hydraulic fluid power - Determination of pressure ripple levels generated in systems and components - Precision method for pumps

BS ISO 10767-2-1999

液压传动.系统和元件中产生压力波动值的测定.泵的简化方法

Hydraulic fluid power - Determination of pressure ripple levels generated in systems and components - Simplified method for pumps

BS ISO 10816-5-2001

机械振动.在非旋转部件上测量评价机械振动.水力发电厂和泵站机组

Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Machine sets in hydraulic power and pumping plants

BS ISO 12334-2000

航空航天.液压的压力补偿的变量输送泵.35000KPa系统的一般要求

Aerospace - Hydraulic, pressure-compensated, variable delivery pumps - General requirements for 35000 kPa systems

BS ISO 14617-9-2004

图示的图形符号.泵、压缩机和风扇

Graphical symbols for diagrams - Pumps, compressors and fans

BS ISO 14681-1998

柴油发动机.燃料喷射泵试验.燃料喷嘴的校准

Diesel engines - Fuel injection pump testing - Calibrating fuel injectors

BS ISO 14686-2003

液体比重的测定.水井的泵送试验.设计、性能和使用的考虑和指南

Hydrometric determinations - Pumping tests for water wells - Considerations and guidelines for design, performance and use

BS ISO 16902-1-2003

液压传动.用声强法测定声功率级的试验规程.工程法.泵

Hydraulic fluid power - Test code for the determination of sound power levels using sound intensity techniques - Engineering method - Pumps

BS ISO 17559-2004

液压传动.电控液压泵.性能特征测定的试验方法

Hydraulic fluid power - Electrically controlled hydraulic pumps - Test methods to determine performance characteristics

BS ISO 3019-1-2001

液力传动.容积式泵和马达的安装法兰盘和轴伸的尺寸及标识代码.以米制单位表示的英制系列

Hydraulic fluid power - Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors - Inch series shown in metric units

BS ISO 3019-2-2001

液力传动.容积式泵和马达的安装法兰盘和轴伸的尺寸及标识代码.米制系列

Hydraulic fluid power - Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors - Metric series

BS ISO 3069-2001

端吸离心泵.机械密封和软密封件密封腔尺寸

End-suction centrifugal pumps - Dimensions of cavities for mechanical seals and for soft packing

BS ISO 4008-3-2003

道路车辆.喷油泵试验.应用和试验程序

Road vehicles - Fuel injection pump testing - Application and test procedures

BS ISO 4093-2000

柴油发动机.喷油泵.试验用高压管

Diesel engines - Fuel injection pumps - High-pressure pipes for testing

BS ISO 6145-2-2001

气体分析.标定用混合气体的制备.动态容量法.容积计量泵

Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Volumetric pumps

BS ISO 6519-2004

柴油机.喷油泵.轴端和毂盘的锥度

Diesel engines - Fuel injection pumps - Tapers for shaft ends and hubs

BS ISO 7299-1997

柴油发动机.燃油注射泵端面安装法兰盘

Diesel engines - End-mounting flanges for fuel injection pumps

BS ISO 7612-2006

柴油机.共轨燃料喷射系统用基座安装直列式喷油泵和高压供油泵.安装尺寸

Diesel engines - Base-mounted in-line fuel injection pumps and high-pressure supply pumps for common rail fuel injection systems - Mounting dimensions

BS ISO 7879-1998

柴油发动机.托架安装直列式燃料喷射泵.安装尺寸

Diesel engines - Cradle mounted in-line fuel injection pumps - Mounting dimensions

BS ISO 7919-5-2005

机械振动.通过对旋转轴的测量评价机械振动.水力发电厂和泵站机组

Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Machine sets in hydraulic power generating and pumping plants

BS ISO 8976-2004

夹扭钳和剪切钳.水泵钳.尺寸和试验值

Pliers and nippers - Multiple slip joint pliers - Dimensions and test values

BS M 65-1987

压力补偿变量液压泵规范

Specification for pressure compensated variable delivery hydraulic pumps

DD ENV 12102-1997

带电动压缩机的空调器、热力泵和除湿器.机载噪音的测量.噪音等级的测定.

Air conditioners, heat pumps and dehumidifiers with electrically driven compressors. Measurement of airborne noise. Determination of the sound power level

KIT 76-2001

制冷系统和热泵.安全和环境规定(BS EN 378)

Refrigeration and heat pumps - Safety and environment set (BS EN 378)