IEC 60041 Corrigendum 1-1996

测定水轮机、蓄能泵和水泵-水轮机水力性能的现场验收试验

Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump-turbines

IEC 60041-1991

测定水轮机、蓄能泵和水泵-水轮机水力性能的现场验收试验

Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump-turbines

IEC 60193-1999

水轮机、蓄能泵和水泵水轮机 模型验收试验

Hydraulic turbines, storage pumps and pump-turbines - Model acceptance tests

IEC 60335-2-40 AMD 1-2006

家用和类似用途电器.安全.第2-40部分:电动热泵、空调器和去湿器的特殊要求.修改件1

Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air conditioners and dehumidifiers; Amendment 1

IEC 60335-2-40 AMD 2-2006

家用和类似用途电器.安全.第2-40部分:电动热泵、空调器和去湿器的特殊要求.修改件2

Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers; Amendment 2

IEC 60335-2-40 Edition 4.2-2006

家用和类似用途电器.安全.第2-40部分:电动热泵、空调器和去湿器的特殊要求

Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air conditioners and dehumidifiers

IEC 60335-2-40-2002

家用和类似用途电器的安全.第2-40部分:电动热泵、空调器和去湿器的特殊要求

Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air conditioners and dehumidifiers

IEC 60335-2-41 AMD 1-2005

修改件1.家用和类似用途电器.安全.第2-41部分:泵的特殊要求

Amendment 1 - Household and similar electrical appliances - Safety - Part 2-41: Particular requirements for pumps

IEC 60335-2-41 Edition 3.1-2005

家用和类似用途电器.安全.第2-41部分:泵的特殊要求

Household and similar electrical appliances - Safety - Part 2-41: Particular requirements for pumps

IEC 60335-2-41-2002

家用和类似用途电器的安全.第2-41部分:泵的特殊要求

Household and similar electrical appliances - Safety - Part 2-41: Particular requirements for pumps

IEC 60335-2-51-2005

家用和类似用途电器.安全.第2-51部分:加热和供水设施用固定式循环泵的特殊要求

Household and similar electrical appliances - Safety - Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations

IEC 60601-2-24-1998

医用电气设备 第2-24部分:输液泵及其控制器的安全专用要求

Medical electrical equipment - Part 2-24: Particular requirements for the safety of infusion pumps and controllers

IEC 60609-1-2004

水轮机、蓄能泵和水泵水轮机.气蚀损坏的评定.第1部分:反击式水轮机、蓄能泵和水泵水轮机的评定

Hydraulic turbines, storage pumps and pump-turbines - Cavitation pitting evaluation - Part 1: Evaluation in reaction turbines, storage pumps and pump-turbines

IEC 60609-2-1997

水轮机、蓄能泵和水泵水轮机气蚀损坏的评定 第2部分:水斗式水轮机的评定

Cavitation pitting evaluation in hydraulic turbines, storage pumps and pump-turbines - Part 2: Evaluation in Pelton turbines

IEC 60805-1985

蓄能泵和作为水泵运行的水泵水轮机的调试、运行和维护指南

Guide for commissioning, operation and maintenance of storage pumps and of pump-turbines operating as pumps

IEC 60994 Corrigendum 1-1997

水力机械(水轮机、蓄能泵和水泵水轮机)振动与脉动现场测量指南

Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storage pumps and pump-turbines)

IEC 60994-1991

水力机械(水轮机、蓄能泵和水泵水轮机)振动与脉动现场测量指南

Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storage pumps and pump-turbines)

IEC 61290-6-1-1998

光学纤维放大器 基础规范 第6-1部分:泵浦泄漏参数的测量方法 光解复用器

Optical fibre amplifiers - Basic specification - Part 6-1: Test methods for pump leakage parameters - Optical demultiplexer

IEC 61702-1995

直接耦合光伏水泵系统的额定值

Rating of direct coupled photovoltaic (PV) pumping systems

IEC/TR3 61366-1-1998

水轮机、蓄能泵和水泵水轮机 投标文件 第1部分:总则和附录

Hydraulic turbines, storage pumps and pump-turbines - Tendering documents - Part 1: General and annexes

IEC/TR3 61366-2-1998

水轮机、蓄能泵和水泵水轮机 投标文件 第2部分:轴向辐流式水轮机技术规范指南

Hydraulic turbines, storage pumps and pump-turbines - Tendering documents - Part 2: Guidelines for technical specifications for Francis turbines

IEC/TR3 61366-3-1998

水轮机、蓄能泵和水泵水轮机 投标文件 第3部分:水斗式水轮机的技术规范指南

Hydraulic turbines, storage pumps and pump-turbines - Tendering documents - Part 3: Guidelines for technical specifications for Pelton turbines

IEC/TR3 61366-4-1998

水轮机、蓄能泵和水泵水轮机 投标文件 第4部分:转浆式和定浆式水轮机的技术规范指南

Hydraulic turbines, storage pumps and pump-turbines - Tendering documents - Part 4: Guidelines for technical specifications for Kaplan and propeller turbines

IEC/TR3 61366-5-1998

水轮机、蓄能泵和水泵水轮机 投标文件 第5部分:贯流式水轮机的技术规范指南

Hydraulic turbines, storage pumps and pump-turbines - Tendering documents - Part 5: Guidelines for technical specifications for tubular turbines

IEC/TR3 61366-6-1998

水轮机、蓄能泵和水泵水轮机 投标文件 第6部分:水泵水轮机的技术规范指南

Hydraulic turbines, storage pumps and pump-turbines - Tendering documents - Part 6: Guidelines for technical specifications for pump-turbines

IEC/TR3 61366-7-1998

水轮机、蓄能泵和水泵水轮机 投标文件 第7部分:蓄能泵的技术规范指南

Hydraulic turbines, storage pumps and pump-turbines - Tendering documents - Part 7: Guidelines for technical specifications for storage pumps

IEC/TS 62091-2003

低压开关设备和控制设备.固定式消防泵的驱动器用控制器

Low-voltage switchgear and controlgear - Controllers for drivers of stationary fire pumps

ISO 10767-1-1996

液压传动 系统和元件产生压力波动值的测定 第1部分:用于泵的精密方法

Hydraulic fluid power - Determination of pressure ripple levels generated in systems and components - Part 1: Precision method for pumps

ISO 10767-2-1999

液压传动 系统和元件产生压力波动值的测定 第2部分:用于泵的简化方法

Hydraulic fluid power - Determination of pressure ripple levels generated in systems and components - Part 2: Simplified method for pumps

ISO 10816-5-2000

机械振动 在非旋转部件上测量和评定机器振动 第5部分:水力发电厂和泵站机组

Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 5: Machine sets in hydraulic power generating and pumping plants

ISO 12334-2000

航空航天 带压力补偿的变流量液压泵 35000 kPa系统的一般要求

Aerospace - Hydraulic, pressure-compensated, variable delivery pumps - General requirements for 35000 kPa systems

ISO 13253-1995

管道式空调器和气-气加热泵 性能的检测和额定功率

Ducted air-conditioners and air-to-air heat pumps - Testing and rating for performance

ISO 13256-1-1998

水源热泵 性能试验和额定功率 第1部分:水-气和盐水-气热泵

Water-source heat pumps - Testing and rating for performance - Part 1: Water-to-air and brine-to-air heat pumps

ISO 13256-2-1998

水源热泵 性能试验和额定功率 第2部分:水-水和盐水-水热泵

Water-source heat pumps - Testing and rating for performance - Part 2: Water-to-water and brine-to-water heat pumps

ISO 13261-1-1998

空调和空气源热泵设备的声功率额定值 第1部分:无室外管道设备

Sound power rating of air-conditioning and air-source heat pump equipment - Part 1: Non-ducted outdoor equipment

ISO 13261-2-1998

空调和空气源热泵设备的声功率额定值 第2部分:无室内管道设备

Sound power rating of air-conditioning and air-source heat pump equipment - Part 2: Non-ducted indoor equipment

ISO 13457-2000

农业灌溉设备 水驱动的化学制剂喷射泵

Agricultural irrigation equipment - Water-driven chemical injector pumps

ISO 13709-2003

石油、石油化工和天然气工业用离心泵

Centrifugal pumps for petroleum, petrochemical and natural gas industries

ISO 13710-2004

石油、石油化学和天然气工业.往复式变容真空泵

Petroleum, petrochemical and natural gas industries - Reciprocating positive displacement pumps

ISO 13948-1-2000

柴油机 燃料喷射泵和燃料喷射器低压连接 第1部分:螺纹连接件

Diesel engines - Fuel injection pumps and fuel injector low-pressure connections - Part 1: Threaded connections

ISO 13948-2-2000

柴油机 燃料喷射泵和燃料喷射器低压连接 第2部分:无螺纹(推进式)连接件

Diesel engines - Fuel injection pumps and fuel injector low-pressure connections - Part 2: Non-threaded (push-on) connections

ISO 14617-9-2002

图表用图形符号.第9部分:泵、压缩机和风扇

Grahical symbols for diagrams - Part 9: Pumps, compressors and fans

ISO 14681-1998

柴油机 燃料喷射泵试验 燃料喷射器的校正

Diesel engines - Fuel injection pump testing - Calibration fuel injectors

ISO 14847-1999

回转容积泵 技术要求

Rotary positive displacement pumps - Technical requirements

ISO 15083-2003

小艇.舱底泵吸系统

Small craft - Bilge-pumping systems

ISO 15136-1-2001

石油和天然气工业用下降孔设备 人工升降机用推进腔体泵系统 第1部分：泵

Downhole equipment for petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1: Pumps

ISO 15136-2-2006

石油和天然气工业.人工升降机用推进腔体泵系统.第2部分:表面传动系统

Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 2: Surface-drive systems

ISO 15783-2002

无密封旋转动力泵.2级.规范

Seal-less rotodynamic pumps - Class II - Specification

ISO 16017-1-2000

室内、环境和工作场所空气 用吸附管/热解吸/毛细管气相色谱法作挥发性有机化合物的取样及分析 第1部分:泵唧

Indoor, ambiant and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 1: Pumped sampling

ISO 1607-1-1993

容积真空泵 性能测量方法 第1部分:体积流速(抽速)的测量

Positive-displacement vacuum pumps; measurement of performance characteristics; part 1: measurement of volume rate of flow (pumping speed)

ISO 1607-2-1989

容积真空泵 性能测量方法 第2部分:极限压力的测量

Positive-displacement vacuum pumps; measurement of performance characteristics; part 2: measurement of ultimate pressure

ISO 1608-1-1993

蒸气真空泵 性能特性的测量 第1部分:体积流速(抽速)的测量

Vapour vacuum pumps; measurement of performance characteristics; part 1: measurement of volume rate of flow (pumping speed)

ISO 1608-2-1989

蒸气真空泵 性能特性的测量 第2部分:临界前级压力的测量

Vapour vacuum pumps; measurement of performance characteristics; part 2: measurement of critical backing pressure

ISO 16200-1-2001

工作场所空气质量 采用溶剂解吸作用/气相色谱法对挥发性有机化合物取样和分析 第1部分：泵激取样法

Workplace air quality - Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography - Part 1: Pumped sampling method

ISO 16330-2003

往复式变容真空泵和泵装置.技术要求

Reciprocating positive displacement pumps and pump units - Technical requirements

ISO 16902-1-2003

液压传动.用声强法测定声功率级的试验规程:工程法.第1部分:泵

Hydraulic fluid power - Test code for the determination of sound power levels using sound intensity techniques: Engineering method - Part 1: Pumps

ISO 17559-2003

液压流体动力.电控液压泵.性能特征测定的试验方法

Hydraulic fluid power - Electrically controlled hydraulic pumps - Test methods to determine performance characteristics

ISO 17613-1-2006

饮用水人工操作泵.选择和验收.第1部分:东南亚

Manually operated pumps for drinking water - Selection and acceptance - Part 1: Southeast Asia

ISO 20763-2004

石油和相关产品.液压液耐磨性的测定.叶轮泵法

Petroleum and related products - Determination of anti-wear properties of hydraulic fluids - Vane pump method

ISO 21049-2004

泵.离心和旋转泵用轴密封系统

Pumps - Shaft sealing systems for centrifugal and rotary pumps

ISO 2151-2004

声学.压缩机和真空泵的噪声试验规范.工程方法(2级)

Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (Grade 2)

ISO 21573-1-2006

建筑施工机械和设备.混凝土泵.第1部分:技术和工业规范

Building construction machinery and equipment - Concrete pumps - Part 1: Terminology and commercial specifications

ISO 24490-2005

低温容器.低温设备用泵

Cryogenic vessels - Pumps for cryogenic service

ISO 2714-1980

液态烃 用容积置换仪表系统而非分配泵系统测量体积

Liquid hydrocarbons; Volumetric measurement by displacement meter systems other than dispensing pumps

ISO 2858-1975

端吸离心泵(额定压强 16 bar) 标记、性能和尺寸

End-suction centrifugal pumps (rating 16 bar); Designation, nominal duty point and dimensions

ISO 3019-1-2001

液压传动 活塞泵和马达的安装法兰和轴端的尺寸和标识码 第1部分：用米制单位表示的英制系列

Hydraulic fluid power - Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors - Part 1: Inch series shown in metric units

ISO 3019-2-2001

液压传动 活塞泵和马达的安装法兰和轴端的尺寸和标识码 第2部分：米制系列

Hydraulic fluid power - Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors - Part 2: Metric series

ISO 3069-2000

端吸离心泵 机械密封和软填料密封腔的尺寸

End-suction centrifugal pumps - Dimensions of cavities for mechanical seals and for soft packing

ISO 3529-2-1981

真空技术 词汇 第2部分:真空泵和有关术语 三种语言版

Vacuum technology; Vocabulary; Part 2 : Vacuum pumps and related terms Trilingual edition

ISO 3661-1977

端吸离心泵 底座尺寸和安装尺寸

End-suction centrifugal pumps; Baseplate and installation dimensions

ISO 3662-1976

液压传动 泵和马达 几何排量

Hydraulic fluid power; Pumps and motors; Geometric displacements

ISO 4008-1-1980

道路车辆 喷油泵试验 第1部分:动态条件

Road vehicles; Fuel injection pump testing; Part 1 : Dynamic conditions

ISO 4008-2-1983

道路车辆 喷油泵试验 第2部分:静态条件

Road vehicles; Fuel injection pump testing; Part 2 : Static conditions

ISO 4008-3 AMD 1-2002

道路车辆.喷油泵试验.第3部分:应用和试验程序.修改1

Road vehicles - Fuel injection pump testing - Part 3: Application and test procedures; Amendment 1

ISO 4008-3-1987

道路车辆 喷油泵试验 第3部分:应用和试验程序

Road vehicles; Fuel injection pump testing; Part 3 : Application and test procedures

ISO 4093-1999

柴油机 喷油泵 试验台用高压油管

Diesel engines - Fuel injection pumps - High-pressure pipes for testing

ISO 4113-1988

道路车辆 柴油机喷油泵的校泵油

Road vehicles; calibration fluid for diesel injection equipment

ISO 4391-1983

液压传动 泵、马达和整体式传动装置 参数定义和字母符号

Hydraulic fluid power; Pumps, motors and integral transmissions; Parameter definitions and letter symbols

ISO 4409-1986

液压传动 容积式泵、马达和整体式传动装置 稳态性能测定

Hydraulic fluid power; Positive displacement pumps, motors and integral transmissions; Determination of steady-state performance

ISO 4412-1-1991

液压传动 空气噪声级测定的试验规范 第1部分:泵

Hydraulic fluid power; test code for determination of airborne noise levels; part 1: pumps

ISO 4412-3-1991

液压传动 空气噪声级测定的试验规范 第3部分:泵 采用平行六面体传声器阵列的方法

Hydraulic fluid power; test code for determination of airborne noise levels; part 3: pumps; method using a parallelepiped microphone array

ISO 5151-1994

无输入空调器和热泵 性能参数试验

Non-ducted air conditioners and heat pumps - Testing and rating for performance

ISO 5198-1987

离心泵、混流泵和轴流泵 液压性能试验规范 精密级

Centrifugal, mixed flow and axial pumps; Code for hydraulic performance tests; Precision grade

ISO 5199-2002

离心泵的技术规范.2类

Technical specifications for centrifugal pumps - Class II

ISO 5302-2003

真空技术.涡轮分子泵.性能特征的测量

Vacuum technology - Turbomolecular pumps - Measurement of performance characteristics

ISO 6145-2-2001

气体分析 用动态容量法制备标定用混合气体 第2部分：容量泵

Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 2: Volumetric pumps

ISO 6519-2004

柴油机.喷油泵.轴端和毂盘的锥度

Diesel engines - Fuel injection pumps - Tapers for shaft ends and hubs

ISO 7224-1983

葡萄栽培和葡萄酒酿制设备 捣碎泵 试验方法

Equipment for vine cultivation and wine making; Mash pumps; Methods of test

ISO 7299-1996

柴油机 喷油泵端面法兰

Diesel engines - End-mounting flanges for fuel injection pumps

ISO 7440-1-1991

道路车辆 喷油泵试验台 第1部分:标准喷油器总成

Road vehicles; fuel injection equipment testing; part 1: calibration nozzle and holder assemblies

ISO 7440-2-1991

道路车辆 喷油泵试验台 第2部分:孔板流量测量

Road vehicles; fuel injection equipment testing; part 2 orifice plate flow-measurement

ISO 7876-1 AMD 1-1999

燃油系统 词汇 第1部分:喷油泵 修改1 两种语言版

Fuel injection equipment - Vocabulary - Part 1: Fuel injection pump; Amendment 1

ISO 7876-1-1990

燃油系统 词汇 第1部分:喷油泵 三种语言版

Fuel injection equipment; vocabulary; part 1: fuel injection pumps

ISO 7879-1997

柴油机 柱塞式喷油泵 安装尺寸

Diesel engines - Cradle-mounted in-line fuel injection pumps - Mounting dimensions

ISO 7886-2-1996

一次性使用无菌皮下注射器 第1部分:带动力驱动注射泵的注射器

Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps

ISO 7919-5-2005

机械振动.通过旋转轴的测量评价机械振动.第5部分:水力发电厂和泵站机组

Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 5: Machine sets in hydraulic power generating and pumping plants

ISO 8278-1986

航空航天 液压式压力补偿变流量泵 一般要求

Aerospace; Hydraulic, pressure compensated, variable delivery pumps; General requirements

ISO 8426-1988

液压传动 容积式泵和马达 空载排量的测定

Hydraulic fluid power; positive displacement pumps and motors; determination of derived capacity

ISO 8849-2003

小艇.电动直流舱底泵

Small craft - Electrically operated direct-current bilge pumps

ISO 8976-2004

夹扭钳和剪切钳.水泵钳.尺寸和试验值

Pliers and nippers - Multiple slip joint pliers - Dimensions and test values

ISO 9534-1989

道路车辆 燃油泵的电气连接

Road vehicles; fuel pump electric connections

ISO 9905 Technical Corrigendum 1-2005

离心泵的技术规范.I类.技术勘误1

Technical specifications for centrifugal pumps - Class I - Technical Corrigendum 1

ISO 9905-1994

离心泵技术条件 Ⅰ类

Technical specifications for centrifugal pumps - Class I

ISO 9906-1999

回转动力泵 液压性能验收试验 等级1和2

Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1 and 2

ISO 9908-1993

离心泵技术条件 Ⅲ类

Technical specifications for centrifugal pumps; class III

ISO/TR 17766-2005

离心泵运转用粘性液体.性能修正

Centrifugal pumps handling viscous liquids - Performance corrections